IMG_2175-2.jpg

Limited Slip Differentials

An E21 LSD can be installed in a 2002 with minimum effort by installing our axle flange, bolts, spacer kit, and your stock 2002 differential cover. Check out the complete kit or individual kit components down below.

A LIMITED SLIP DIFFERENTIAL

CAN BE FIT IN ALL 2002s

ALL YEARS, AND ALL MODELS WITH SHORT NECK TYPE

The Face.png


HERE ARE THREE LIMITED SLIP DIFFERENTIAL OPTIONS WE OFFER

 
  1. E21 320I LSD - WE OCCASIONALLY HAVE STOCK OF E21 LSDS, SO PLEASE CHECK THE AVAILABILITY BELOW or check the ebay store.

  2. When available we offer rebuilt E21 or 2002 LSDs. these differentials are custom built from our current stock. See Custom Builds Section Below

  3. We can convert open 2002 or E21 differential to a limited slip.

LSD 2.png

WE RECOMMEND A 3.64 RATIO DIFFERENTIAL IF THE CAR HAS A 4-SPEED TRANSMISSION, OR A 3.91 RATIO DIFFERENTIAL IF THE CAR HAS A 5-SPEED OVERDRIVE TRANSMISSION. FOR A GREATER DISCUSSION OF DIFFERENTIAL GEAR RATIOS CHECK OUT OUR FORUM

 
 

Custom Shortneck LSD

BMW 2002 E36 Spool Limited Slip Differential - 25% LOCKUP

Details:

  • Rebuilt. The differential is fully disassembled and cleaned. The clutches are removed, cleaned, and media blasted to restore the original friction surface prior to reassembly. The diff case is modified slightly to allow for installation of the limited slip spool, and then the diff is painted, reassembled, and set up with the correct backlash and proper gear contact. New bearings and seals are also installed.

  • Included are custom modified E21 drive flanges to allow for easy installation of 2002 axles along with hard anodized billet aluminum spacers and longer hardened bolts so the correct geometry is maintained.

  • Fits any 2002 that does not have a long neck diff - basically any made after 1968. 

  • This is a rebuilt LSD that comes with a 12 month warranty. I've sold hundreds of used and rebuilt LSDs to happy owners and won't try to pass off a worn out or poorly built diff on anyone.

 

WE CAN CREATE CUSTOM BUILDS


 
Custom Ratio Differential
$1,700.00

Due to a lack of market availability, we are unable to perpetually offer custom gear ratio differentials. We are instead taking them on a per-customer basis, first come, first served.

Price may vary on availability.

 
 

Can’t Find What You’re Looking For?

Check out our Limited Slip Differential Store

 
 
 

Already Have A LSD?

aardvarc racing supplies some of the most durable and rattle-free hardware for bmw 2002. If you’re looking for reliable hardware to attach your differential to a 2002, you’ve come to the right place.

 

SELECT FROM THE OPTIONS BELOW


LSD Spacers (2 Included)
$55.00

These aircraft grade hard-anodized aluminum 6mm spacers were designed for our spacer and bolt kit, which can be purchased here. The holes fit 8mm bolts.

LSD Posi Axle Conversion Spacer and Bolt Kit
$75.00

In order to install an E21 LSD in your 2002 you need either of the following:

  • Double drilled axle flanges or '76 2002 axle flanges and 1/4" spacers and longer 8mm bolts to maintain the correct geometry,

  • OR early E21 320 CV axles, spacers and 8mm bolts, and some labor to install the CVs on your 2002 half shafts.

Assuming you have completed either one of these options, you will need spacers and longer bolts. Included in this kit is the set of spacers and hardware. The aircraft grade hard-anodized aluminum 6mm spacers and longer 10.9 grade bolts are necessary to maintain the geometry BMW intended for the axles and CVs. Otherwise the CV joints will be stretched, possibly resulting in premature CV joint wear.

Differential Output Axle Flanges (2 Included)
from $95.00

These OEM E21 Differential Output Axle Flanges are of the highest quality and are drilled with a second set of threaded holes to match the 2002 CV Axles.

*This pricing is based on a core exchange policy. Select no core charge if you are sending your E21 axle flanges in advance. If you are going to send you axle flanges later, select the core charge option as it is refundable.

Axle Bolts (12 Included)
$25.00

These longer 10.9 grade bolts with an 8mm diameter, are necessary to maintain the geometry BMW intended for the axles and CVs, and can be bought individually on this page, or included in our spacer and bolt kit located here.